A Bad Case of Leaky Abstraction
The story I’m about to tell is the worst case of leaky abstraction that I’ve encountered and had to resolve. Actually, it’s the most profound example that I know of. Profound here is used in a negative sense, of course. This isn’t the performance issues Joel brings as examples to leaky abstraction. Nor is it a case of getting a network exception while working with files, because the folder is now mapped to a network drive. Nor a case of getting out-of-disk-space error while writing to a file-backed memory block. This is a case of frustration and a very hard-to-catch defect. A case of a project that came too close to failing altogether, had we not figured it out in time.
Our flagship project worked with 3rd party servers which for technical reasons had to be installed on the same machine as our product. This was an obvious shortcoming and had to change. The requirements came in and we were asked to move the interfaces with all 3rd party servers into lightweight distributed processes. These new processes were dubbed Child processes, while the central process, well, Central. A Child would run on a different machine on the network, communicating with the Central process to get commands, execute them and return the results.
The design was straightforward: all processes would be running as services listening on some configurable port. The commands were simple application-level message objects, each with its own type, serialized on the wire. The operations were synchronous and we needn’t progress updates or heartbeats. We left the network design synchronous as well, for simplicity.
The developer who was assigned the communication-layer had background in web-services and proposed to use standard HTTP protocol. We thought about it and declared that while it would have some small overhead, the simplicity of reusing some library would be a plus. After all, HTTP has data recovery and is a standard protocol. And if we really cared about overhead, we’d use UDP which has no duplicate detection, data recovery or even ordered packet transmission. Plus, the developer who’d work on this feature was comfortable with HTTP. So why not?
As it turns out, HTTP was the single worst decision made on this particular project.
Since we were now transmitting potentially sensitive data, the requirements were amended to include data encryption to protect our customers’ data from network sniffers. We used a standard asymmetric encryption for extra security. This meant that we had to generate a pair of public and private keys each time we connected. We devised a protocol to communicate the key the Child must have using a symmetric encryption algorithm. We were confident this was secure enough for our needs and it wasn’t overly complicated to implement.
The project was complete when I took the product for a final set of developer white-box testing. This is something I learned to do before shipping any product, as I do have the responsibility of designing the features, I also feel responsible for looking under the hood in case there is some potential mechanical or technical issue. Much like your car mechanic would do before you go on an off-road trip.
That’s when things started to fall apart. All worked fine, except every now and then I’d get errors and the Child would disconnect. Inspecting the logs showed data-encryption exceptions. The deciphering function was failing. Every single developer who run the code verified that it worked fine without any problems whatsoever. I asked them to pay attention to this issue. They came back saying all was perfectly fine. It was only on my machine!
Mind you, I learned not to blame before I eliminate every possible culprit. And the prime suspect is, always, a bug. A developer error. So I started sniffing around. Visiting the design back and forth. Nothing made sense of the issue. The code works, almost all the time. Then it fails. Reconnect again, and it works fine… until it fails again.
Troubleshooting this issue wasn’t fun, precisely because it wasn’t fruitful. No amount of debugging helped, or, in fact, could ever help. The puzzle had to be solved by reason. Experimentation showed as much as I had already gathered from the logs. Still, I tried different scenarios. One thing was for sure, you couldn’t tell when it’ll fail next.
Remember that HTTP is a connectionless protocol. That is, it’s designed to communicate a single request and its response and disconnect. This is the typical scenario. It holds no connections and no states, therefore, it has no session. On the web, sessions are realized by the HTTP server. An HTTP server would typically create some unique key upon login or first-request missing a key, and it would track all subsequent requests by getting the said key either in the URL or using cookies. In any event, even though a web-service may have support for sessions, the underlying protocol is still connectionless and stateless.
To improve performance, an afterthought of reusing connections was added. This is typically called Keep-Alive. The idea is that a flag is added to the HTTP header which tells the server not to close the connection immediately after responding to the request, anticipating further requests. This is reasonable, as a web-page typically loads multiple images and embedded items from the same server. The client and server supporting Keep-Alive reuse the same connection for several requests, until one of them closes the connection. What is most important in this scenario is that if either party doesn’t respect this hint, nothing would break. In fact, nothing would work any different, except, of course, for the extra connections and disconnections that would occur for each request.
Since the implementor of this feature was a savvy web developer, he always had this flag set. And so, as long as the connection wasn’t interrupted, or indeed, the underlying library we were using didn’t decide to close the connection on whim, all was well and we had no problems. However, when a new request went with a new connection, rather than an existing one, the Child’s server would accept a new socket, on a new port, rather than the previously open socket. This is what was happening on my test environment. Perhaps it was the fact that I was testing across VM images that triggered the disconnections. Anyway, this newly opened socket on the Child has no encryption details associated with it. It’s a brand-new connection. It should expect encryption key exchange. But due to implementation details, the request would have an ‘encrypted’ flag set and the Child wouldn’t mind that we negotiated no cryptographic keys. It’d go ahead and try to decipher the request, only, it couldn’t. Resulting in the logged encryption exception followed by disconnection.
Once the issue was figured out, the solution was simple, albeit costly. The HTTP abstraction had leaked an ugly property that we had assumed abstracted away. At design time, we couldn’t care what protocol we used to carry our bits. Encryption was added almost as an afterthought. True that encryption does require a state. However looking at our code, the socket-level connection was abstracted by layers and layers of library code. In fact, all we had was a single static function which took a URL string for a request. We had serialized and encoded the request message in base-64 and appended to the URL, which contained the server hostname/ip and port; standard web request, really.
On the communication layer, we had this single URL construction and the request call. On the data layer, we had the encryption, serialization and data manipulation logic. On the application layer, well, there were no network details whatsoever. Most of the previous code which worked locally had remained the same, with the implementation changed to interface the new network layer. So in a sense the code evolved and adapted to its final form and it wasn’t anywhere near apparent that we had leaked a major problem into our code.
In hindsight, we should’ve taken matters into our hands and implement a session-based protocol directly. This would make sense because we’d be in complete control of all network matters. For one, with HTTP we couldn’t change the sockets to use async logic, nor could we change the buffer sizes and timeouts. Perhaps we didn’t need to, but considering the gigabytes/hour we expected to transfer, sooner or later we’d have to optimize and tune the system for performance. But, the developer assigned was inexperienced and we couldn’t afford the time overhead. Personally, I feared things would get too complicated for the assigned developer to handle. I let him pick the protocol he was most comfortable with. And that’s the real danger of leaky abstraction; everyone is tricked, including the experienced.
Indeed, we ended up rewriting the communication layer. First the HTTP code was replaced with plain sockets using TCP/IP. Next, sessions were added, such that disconnections were recoverable. That is, the data layer didn’t care whether communication was interrupted or not. We weren’t going to rely on the fact that we controlled the sockets. Disconnections were made irrelevant by design. And finally, our protocol required a strict sequence of initialization and handshake that insured correct state. Once the code was working as expected, we changed the sockets to use async interface for maximum performance.
Overall, we spent an extra 2 man/months and, as a result, the data+communication layer was sped up several times over. Still, this was one hell of a case of leaky abstraction.
- The Law of Leaky Abstractions [joelonsoftware.com]
- Leaky Abstractions and the Last Responsible Moment for Design [codebetter.com]
- Leaky Abstraction [wikipedia.org]
- Leaky Abstraction [c2.com]
Many are asking why not use SSL? The answer is because HTTP was the wrong choice in the first place.
We weren’t building a web-service. This was a backend server communicating with the main product. We didn’t want to limit the protocol, features or extendability by the choice of communication details. SSL would resolve the encryption issue, but we’d have had to implement an HTTPS server. In addition, whatever application protocol we would eventually realize, it had to be connectionless. The encryption layer simply uncovered this design implication that we had overlooked, hence the leak in the communication protocol abstraction. At that point we didn’t have any control messages nor did we have requests that needed states, later we added both. In fact, we added a command to iterate over a large set of data, returning one item at a time. HTTP/S would’ve made this harder to implement, as the state would have had to be sent with each request. Control messages and heartbeats would’ve been pointless.
In short, HTTP gave us very little and the connectionless nature caused as a lot of trouble. We got rid of both. We exchanged a wrong solution with the right one, hardly reinventing the wheel, if you ask me.
(Note: Opinions expressed in this article and its replies are the opinions of their respective authors and not those of DZone, Inc.)